Epson Stylus COLOR 880 Service Manual page 103

EPSON Stylus COLOR 880
7) Remove the pin on the left side of the Edge Guide through the pin hole,
and remove the Edge Guide and Compression Spring 1.96. Refer to Figure
4-XX.
8) Depress the hook, and remove the LD Roller Shaft from the Paper Feed
Roller Assembly.
ASF HP
Detection
Wheel
Paper Feed Roller
Assembly
Figure 4-37. Disassembling the ASF Assembly
Disassembly and Assembly
Hopper Assembly
ASF Frame
Compression
Spring 2.06
Gear 32
Hopper Release Lever
LD Roller Shaft
Disassembly Procedures
Figure 4-38. Removing the Edge Guide
During disassembly and assembly of the hopper assembly,
do not let the grease on the cam parts touch other parts.
Wipe off any grease smeared on other parts.
Be careful of the direction of the Hopper Release Lever
when installing it. Refer to Figure 4-39.
Grease
Hopper Release Lever
Figure 4-39. Assembling the LD Hopper Release Lever
Revision A
Edge Guide
Compression Spring 1.96
103