Epson Stylus COLOR 880 Service Manual page 101

EPSON Stylus COLOR 880
4.2.4.6.1 Removing the Paper Feed Roller Assembly
1) Remove the ASF assembly. (Refer to Section 4.2.4.6.)
2) Remove the Gear 32 from the right edge of the LD Shaft by releasing the
hook in the Gear 32. Refer to Figure 4-33.
3) Remove the Right Hopper Release Lever from the right edge of the LD
Roller Shaft. Refer to Figure 4-33.
Gear 32
Figure 4-33. Removing the Gear 32 & LD Roller
4) Raise the Paper Return Lever on the right side, and slide the LD Roller
Shaft to the left. Release the hook securing the ASF HP Detection Wheel,
and remove the Wheel. Slide the LD Roller Shaft to the right, and remove it
from the ASF frame. Refer to Figure 4-33.
Disassembly and Assembly
Right Hopper
Release Lever
Hook portion
Disassembly Procedures
ASF HP Detector
Wheel
Hook on the ASF HP
Detector Wheel
Figure 4-34.
Removing the ASF HP Detector Wheel
Revision A
LD Roller Shaft
101