EPSON Stylus COLOR 760
4.2.1 Removing the Upper Housing
Since the printer mechanism itself structures the bottom part, the printer
mechanism appears just by removing the Upper Housing.
1. Open the printer cover and turn the PG adjustment lever towards (+) side.
2) Remove 4 screws (No.8) securing the Upper Housing, and remove by
lifting it upward. Refer to Figure 4-2.
Lift up and remove the Upper Housing, pulling it forward.
(Since it collides with the carriage.)
After assembling the Upper Housing, confirm the
Head FFC is placed in the gutter which is located in
the back side of the Upper Housing.
If the Head FFC is not placed in the gutter, it may
damage the FFC.
Disassembly and Assembly
Figure 4-2. Removing the Upper Housing