Epson Stylus COLOR 880 Service Manual page 88

EPSON Stylus COLOR 880
This part should be
touching the CR shaft
receiver.
Make sure that the
protrusion of the
carriage is aligned with
the holes of the earth
board.
Nozzle Selector is included in the printhead.
Figure 4-8. Installing the Printhead
Disassembly and Assembly
Make sure that these
protrusions are in
the U ditches of the
print head side.
Carriage
Assembly
Printhead
Surface
Printhead
Circuit
Board
Disassembly Procedures
Revision A
88