Removing The Housing Assy.,Upper - Epson DLQ-3000 Service Manual

Disassembly and Assembly

Removing the HOUSING ASSY.,UPPER

3.2.5
Step 1 : Remove the screw CBB (M3
remove it.
Remove the COVER,REAR. (Refer to Section 3.2.2.)
Step 2 :
Step 3 : Remove the KNOB, LEVER,RELEASE and CAP,G,ADJUST.
Remove the control panel. (Refer to Section 3.2.3.)
Step
4:
Step 5 : Remove the two saews CBB (M4
Push the two notches at the lower end of the main body with screwdrivers, and remove
Step 6:
the HOUSING ASSY.,UPPER by lifting it up.
CAP, G, ADJUST
Figure 3-8. Removing the HOUSING,ASSY.,U PPER
12) which secures the COVER,SHIELD,REAR and
x
16) which secure the HOUSING ASSY.,UPPER.
x
-
COVER, SHIELD,REAR
screwdriver
/ l i t /