Epson Stylus COLOR 880 Service Manual page 96

EPSON Stylus COLOR 880
8) Remove the Torsion Spring 0.618 between DE Lock Lever and the hook
on the DE unit. Refer to Figure 4-22.
Torsion Spring 0.618
Figure 4-22. Removing the Tension Spring 0.618
9) Push down the hook on the DE unit carefully and slide the DE Lock Lever
until it touches the right frame. The left end of the DE Lock lever comes off
the hole (for DE Lock Lever) in the DE unit.
Refer to Figure 4-23.
10) Pull the left edge of the DE Lock Lever to your side slightly and slide it to
the left carefully to remove the DE Lock Lever from the hole in the Top
Frame. Refer to Figure 4-23.
11) Remove two screws (No.1 & No. 3) securing the DE unit.
Refer to Figure 4-24.
No.1 Screw: Securing the DE Unit to the Middle Frame.
No.3 Screw: Securing the DE unit to the Top Frame.
Disassembly and Assembly
DE Lock Lever
Disassembly Procedures
DE Lock Lever
Hook on the DE Unit
Figure 4-23. Removing the DE Lock Lever
Screw driver
No. 1 Screws on the Middle Frame
Figure 4-24. Removing the DE Assembly
Revision A
Fixing the hole in
the Top Frame
No. 2 Screw on the Top Frame
96