Epson Stylus COLOR 880 Service Manual page 132

EPSON Stylus COLOR 880
5) Click the "OK" button in the above menu. Following message is displayed.
Install the band-new I/C to the printer by following the message.
Figure 5-26. Warning message for brand-new I/C installation
6) After install the brand-new I/C, click the "Yes" button to perform the Initial
ink charge in order to fill out the printhead cavity with the ink.
In this sequence, about 1/5 ink of the brand-new black I/C and 1/7 ink of
the brand-new color I/C are consumed. And it takes about 110 seconds.
If you click the "No" button, the program proceed the I/C exchange
sequence.
7) After complete the Initial ink charge, following message is displayed. Then
click the "Complete" button.
Figure 5-27. Ink change is completed
Adjustment
8) For the next step, click the "nozzle check" in the menu. Following screen is
displayed.
9) Then print the nozzle check pattern automatically. After print the nozzle
check pattern, following message is displayed.
10) Click "OK" button. If any segment in the nozzle check pattern is missing,
click the "OK" button to perform the nozzle check. If all segment is printed
correctly, click the "Complete" button to proceed the Bi-D adjustment
function.
Sequential Repair Service Program feature
Figure 5-28. Nozzle check menu
Figure 5-29. Information message for nozzle condition
Revision A
132