Removing The Pf Roller Assembly And Paper Eject Roller Assembly - Epson Stylus COLOR 880 Service Manual

EPSON Stylus COLOR 880

4.2.4.8 Removing the PF Roller Assembly and Paper Eject Roller Assembly

1) Remove the Upper Housing. (Refer to Section 4.2.1.)
2) Remove the Control Panel and Left Housing Panel.
3) Remove the Left Sub Frame.
4) Remove the ASF Assembly from the Printer Mechanism. (Refer to Section
4.2.4.6.)
5) Remove the five Upper Paper Guide Assemblies and one Right Paper
Guide Assembly, in the following direction, releasing their Torsion Springs
117.6 from the hooks on the Top Frame. Refer to Figure 4-53
Upper Paper Guide Assemblies: Remove them backward.
Right Upper Paper Guide Assembly: Remove it forward.
Upper Paper
Back view of
Guide Assy.
the Printer
Torsion Spring 117.6
Figure 4-53. Removing the Upper Paper Guide Assembly
6) Remove the Earth Spring between the left edge of the PF Roller and the
Bottom Frame. Refer to Figure 4-53.
Disassembly and Assembly
Right Upper
Front view of
Paper Guide
the Printer
Disassembly Procedures
Figure 4-54. Removing the PF Earth Spring
7) Remove two screws (No.1) securing the Front Frame to the Printer
Mechanism and remove it. Refer to Figure 4-55.
8) Remove two screws (No.1) securing the Paper Eject Frame Assembly and
remove it. Refer to Figure 4-55.
No. 1 Screw fixing the Paper
Eject Frame Assembly
No. 1 Screw fixing
the Front Frame
Figure 4-55. Removing the Font Frame & Paper Eject Frame
Revision A
PF Earth Spring
110