Epson Stylus COLOR 880 Service Manual page 90

EPSON Stylus COLOR 880
1. When installing the Waste Ink Absorber Tray Assembly,
make sure to fix it with the Spacer Tray in the left side of
the printer mechanism. Refer to Figure 4-11.
2. Be careful not to damage Loop Scale when removing the
Tray Spacer.
1. After the replacing the Waste Ink Absorber, perform the
following Panel Reset Function for ink overflow counter.
Turn on the Printer while holding the "Load/Eject
SW"+"Cleaning SW", then hold "Cleaning SW" for 10
seconds.
Otherwise, perform the counter reset operation by using
the adjustment program. For details, Refer to Chapter 5
Section 5.2.3.11.
Spacer Tray
Figure 4-11. Installing the Spacer Tray
Disassembly and Assembly Disassembly Procedures
Revision A
90