Epson Stylus COLOR 880 Service Manual page 104

EPSON Stylus COLOR 880
4.2.4.6.2 Removing the LD Roller Assembly
1) Disassemble the ASF assembly and remove the LD Roller Assembly and
Hopper Assembly from the ASF Assembly. (Refer to Section 4.2.4.6.1)
2) Release the two hooks fixing the LD Roller Cover to the Paper Feed Roller
Assembly. Refer to Figure 4-40(Left Figure).
3) Release the two hooks securing the LD Roller, and remove the LD Roller
from the LD Roller Cover. Refer to Figure 4-40(Right Figure).
Hooks for the LD
Roller Cover
Hooks for the LD
Roller Assembly
Figure 4-40. Releasing hooks for LD Roller
When installing the LD roller assembly, make sure that the
hooks are hung on the Paper Feed Roller Assembly.
Do not touch the surface of the LD Roller with bear hand.
Disassembly and Assembly
Hooks
Disassembly Procedures
Revision A
104