Pausing A Job Due To Ink Starvation; Viewing Job Information - Gerber SOLARA UV2 Owner's Manual

CHAPTER 5
Printing Jobs on the GERBER SOLARA UV2

Pausing a job due to ink starvation

If an empty cartridge is not replaced and the reservoir falls below the Full ink level when
printing, the following message is displayed and the job pauses until a new ink cartridge is
installed and the ink reservoir is full again.
Press F2 to display the INK LEVEL DISPLAY to see which reservoir is empty. In the following
illustration, the Magenta ink reserve (reservoir) and cartridge are empty as indicated by an
INK LEVEL DISPLAY
COLOR: K
LEVEL: F
(Press a key)
Replace the cartridge and manually start the refill in the INK MENU. Printing can commence
when the reservoir reaches the Full level.

Viewing job information

You can view information about your job sent from the RIP software including the name,
requested material, and size in inches and centimeters. Job information is only valid after the job
is sent to the printer or during printing.
To view job information
1 From the MAIN MENU press F4, Operate to open the OPERATION menu.
2 Press F4, Job to display the JOB OPERATION menu.
3 Press F4, Job Info to display the job name, requested material, and size.
Job name
Material type
Measurement in inches
and centimeters
4 Press any key to return to the MAIN MENU.
* INK RESERVE EMPTY *
Job Halted
F2 = Details
(Press a key)
V C M G Y
F F E F F
OPERATION
Material
Ink
ENTER for Main Menu
JOB OPERATION
Justify
Activation
ENTER for Main Menu
My Job
ImagePerfect 5700 WG
30 x 45 in
76.2 x 114.3 cm
F Full
e Ink Cartridge empty
E
Ink Reserve and Cartridge empty
Lamps
Job F4
Job Info F4
84
.
E