Table of Contents
Advertisement
CHAPTER 4
Loading Inks and Materials
Replacing empty ink cartridges (when ink remains in the reservoir)
When the cartridge becomes empty and is unable to refill the reservoir to the Full level, the
GERBER SOLARA UV2 displays
cartridge to allow automatic refilling and uninterrupted printing. If the ink cartridge is not
replaced immediately, when the next job is started the following warning message displays:
Press F2 to display the INK LEVEL DISPLAY to view which cartridge is empty. In the following
illustration, the Violet, Cyan and Magenta cartridges are empty as indicated by an
INK LEVEL DISPLAY
COLOR: K
LEVEL:
F
(Press a key)
Press a key to begin printing. The printer will continue printing as long as the reservoir remains
above the Low ink level. Replace the empty ink cartridge with a full cartridge of the same color
and manually begin the fill cycle in the INK MENU which can be done during printing.
See "Manually starting an ink refill" on page 41. (Refilling also automatically takes place after a
printer on/off power cycle.)
CAUTION: Always match the color of the ink cartridge to the color-coded ink slot.
Replacing ink cartridges when the reservoir is empty
If the empty cartridge is not replaced and the reservoir level falls below the Low ink level, the
printer displays the following message and pauses until a new ink cartridge is installed.
Press F2 to display the INK LEVEL DISPLAY to see which reservoir is empty. In the following
illustration, the Magenta ink reserve (reservoir) and cartridge are empty as indicated by an
INK LEVEL DISPLAY
COLOR: K
LEVEL:
F
(Press a key)
Replace the cartridge and manually start the refill in the INK MENU. Printing can commence
when the reservoir level reaches between Low and Full. (Refilling also automatically takes place
after a printer on/off power cycle.)
Ink Cartridge Empty!
WARNING:
INK CARTRIDGE EMPTY
F2 = Details
(Press a key)
V C
M
G
Y
e
e
E
F
F
* INK RESERVE EMPTY *
Job Halted
F2 = Details
(Press a key)
V C
M
G
Y
e
e
E
F
F
on the Job status line. Replace the ink
F
Full
e
Ink Cartridge empty
E
Ink Reserve and Cartridge empty
F
Full
e
Ink Cartridge empty
E
Ink Reserve and Cartridge empty
40
.
e or E
.
E
Advertisement
Table of Contents
Troubleshooting
