Choosing Print Job Justification - Gerber SOLARA UV2 Owner's Manual

CHAPTER 5
Printing Jobs on the GERBER SOLARA UV2

Choosing print job justification

The GERBER SOLARA UV2 gives you the option to position or "justify" your image. You can
select where on the material you would like to position the print job: the left side, the right side,
or in the center.
Note: You can also justify you image(s) using your image RIP software. It is recommended that
you use the same setting in both the RIP software and the printer.
To choose an alignment
1 From the MAIN MENU press F4, Operate to open the OPERATION menu.
2 Press F4, Job to display the JOB OPERATION menu.
F1
3 Press F1, Justify to display the JUSTIFY JOB menu and the current alignment.
4 Choose between three different alignment options (LEFT, RIGHT, and CENTER) using
the F3 and F4 keys.
5 Press ENTER to save your new alignment setting. Press CANCEL to return to the
Main Menu without changing the current alignment.
OPERATION
Material
Ink
ENTER for Main Menu
JOB OPERATION
Justify
Activation
ENTER for Main Menu
JUSTIFY JOB
LEFT
ENTER key to Accept
Lamps
Job F4
Job Info
+ F3
- F4
85