CHAPTER 2
Product Overview
Tip: You can load the material, send the job, and press F1, Start-Job before the UV lamps
complete their startup sequence. The GERBER SOLARA UV2 will begin printing once the
startup sequence completes.
Warming the print heads
When initially powering up the printer or when coming out of idle mode, the print head
temperatures may not be at the proper temperature. If so, a
message displays. If a job is sent to the printer at this time, it will pause, wait until the
Pending
print heads are warmed to the proper temperature, and then begin automatically.
PRINT HEAD WARMING UP! Printing
23