Chapter 2: Product Overview; General Requirements; Size And Weight; Ambient Conditions - Gerber SOLARA UV2 Owner's Manual

Chapter 2:
Product Overview

General requirements

A complete list of requirements and installation instructions can be found in the GERBER
SOLARA UV2 Unpacking, Packing, and Installation Guide. The following sections provide an
overview of GERBER SOLARA UV2 size, weight, and recommended operating conditions.

Size and weight

You must have enough room to maneuver the packed GERBER SOLARA UV2 to its final
location where you can unpack it. Alternately, you can unpack the GERBER SOLARA UV2 and
then wheel it to its final location.
WARNING: The GERBER SOLARA UV2 is packaged in a crate that is 120" long x
60" wide x 68" high (305 cm x 152 cm x 173 cm) and weighs 1650 lbs. (750 kg).
Confirm the lifting capacity of your forklift and the availability of 8 ft (2.5 m)
extended forks before the arrival of the GERBER SOLARA UV2. If the extended
forks are less than 8 ft (2.5 m) you will need the assistance of riggers to move the
crate. Riggers or special moving equipment are the responsibility of the customer.
Crated Size
120" long x 60" wide x 68" high
305 cm x 152 cm x 173 cm

Ambient conditions

The operating and storage environment must meet the following conditions:
♦ Temperature: 65°F to 85°F (18°C to 29°C) Variation within 4°F/2°C per hour
♦ Humidity: 40% - 60%, non-condensing Variation within 5% per hour
♦ Altitude: up to 8,000 ft (2,438 m)
♦ Ventilation: no special ventilation required
♦ Floor level: within ¼" (6mm) from left side of printer to right side of printer
♦ Avoid using printer near open windows, outside doors, or heating or cooling systems
♦ Protect printer and ink cartridges from moisture, dust, drafts, and direct sunlight
Crated Uncrated Size
Weight
1,650 lbs. 105" long x 33" wide x 57" high
750 kg 267 cm x 102 cm x 145 cm
15
Uncrated
Weight
650 lbs.
295 kg