Chapter 4: Loading Inks And Materials; Loading The Inks - Gerber SOLARA UV2 Owner's Manual

Ink jet printer

Table of Contents

Chapter 4:

Loading Inks and Materials

This chapter describes how to load the six ink colors and various types of material both flexible

and rigid into the GERBER SOLARA UV2.

WARNING: Do not disassemble the ink cartridges. If you come in contact with

uncured ink, remove any contaminated clothing and wash them separately with

soap and water. If you get ink in your eyes, rinse for several minutes under running

water and consult a physician.

WARNING: Waste ink, empty cartridges, used swabs, and lint-free wipes must be

disposed according to local laws and regulation. Consult the MSDS sheets and local

codes for proper disposal.

GERBER SOLARA UV2 uses six inks colors: Yellow (Y), Green (G), Magenta (M), Cyan (C),

Violet (V), and Black (K) supplied in 250 gram (230 ml) cartridges. The ink cartridges are

installed in color-coded cartridge slots that fill the six internal reservoirs. The ink cartridges are

installed in either direction with the outlet valve facing down.

Ink cartridge

Internal Reservoir –

Reserve Ink

Note: Inks should also be replaced when they are nine to twelve months beyond their

manufacture date whether or not they are installed in the GERBER SOLARA UV2.

Print heads

Table of Contents

Troubleshooting