Registering The Sender Information (Tx Terminal Id) - Canon imageCLASS 2300 Basic Manual

Registering the Sender Information (TX Terminal ID)

The TX Terminal ID tells the recipient the sender's name and fax number.
Follow the procedure below to select the position where the TX Terminal ID appears
on the recording paper, and to select a Telephone Number Mark.
IMPORTANT
• In the United States, the TX Terminal ID must be printed on the top of every page the
• If you do not specify these settings, you cannot send a fax.
NOTE
The default settings are as follows:
- TX Terminal ID position: '01 OUTSIDE IMAGE'
5
- Telephone Number Mark: '01 FAX'
1
Additional Functions
F3
F4
OK
2
F3
F4
OK
5-12 Registering the Required Sender Information
other party receives. Please see "Registering the Required Sender Information" on p.
5-7 for details on FCC rules governing the use of facsimile equipment in the United
States.
Press [Additional Functions] © press [F3] (M) or [F4] (L) to
highlight <03 FAX SETTINGS> © press [OK].
The FAX SETTINGS menu appears.
Press [F3] (M) or [F4] (L) to highlight <01 USER SETTINGS>
© press [OK].
Each time you press
option becomes highlighted.
The USER SETTINGS menu appears.
F3 F4
(M) or (L), the next or previous menu