Connecting the Video Cable or DVI-D Video Cable
Connections on underside
Female 15 pin Video connector
Connections on underside
Female DVI-D Video connector
• Tilt the screen up and out (away from the stand) to access the connection
ports.
• Connect the 15-pin video cable (the ferrite bead end) or the 24-pin DVI-D
cable to the video port on your PC.
• Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
• Place the cable in the cable management clip.
Video cable
OR
Video cable
Video cable
Video port
2-9