Configuration; Figure 1-2. Reader Cable And Optional Adapter; Table 1-1. Oem And 9-Pin Connectors And 25-Pin Adapter - Elo TouchSystems Entuitive ET1725L Series User Manual

Port Powered Swipe Reader

CONFIGURATION

The Reader, LED Indicator, pin numbers for the 9-pin connector, and the Adapter are shown in
Figure 1-2.
Pin numbers and signal descriptions for the 9-pin (DE9) cable and 25-pin (DB25) adapter shown
in the illustration are listed in Table 1-1. Also listed is the pin list OEM version, P/N 21040077.

Table 1-1. OEM and 9-Pin Connectors and 25-Pin Adapter

Connector for OEM
Version 21040077
J2 on the PCB
* No Connection
** Pin must be connected to TXD (or DTR if TXD not available).
2

Figure 1-2. Reader Cable and Optional Adapter

25-pin
Adapter
-
1 3
2 2
3 20
4 7
-
DE9-pin Signal
Connector
1 NC*
2 RXD (to PC)
3 TXD** (from PC)
4 DTR (from PC)
5 GND
6-9 NC*