Table of Contents
Advertisement
MagTek Device Drivers for Windows
Property
Access
offline_enc
R/W
oper_tout
R/W
pin_blk_fmt
R/W
pinfilldig
R/W
port_name
pwroffdelay
R/W
s_down_tout
R/W
track1ss
track2ss
track2ss
trivpinchk
R/W
trk_enable
R/W
trk1data
trk2data
trk3data
visa_mac1
visa_mac2
visa_mac3
wr_coer
R/W
wr_secure
R/W
xact_type
R/W
14
Set to
to enable encode capability in standalone mode with
1
keyboard;
prevents standalone encoding (MT-95).
0
Operational timeout in seconds (15-255). (IntelliPIN)
PIN block format (IntelliPIN):
(ANSI 9.8) or
ansi
PIN fill digit (0..9, A..F) when
R
Indicates the virtual port number (e.g., COM6) derived from the
friendly port name.
Power off time delay in minutes (5-255). (IntelliPIN)
Shutdown timeout in hours (1-31). Set to
R
Indicates Start Sentinel on Track 1 as received from the device.
R
Indicates Start Sentinel on Track 2 as received from the device.
R
Indicates Start Sentinel on Track 3 as received from the device.
Set to
for trivial PIN checki.e., don't allow 1234. (IntelliPIN)
1
Enable reading and writing of individual tracks. The value of this
property is a string of three characters, with
disabled tracks and
tracks 1 and 2 and disables track 3.
R
Data from track 1 excluding start sentinel and end sentinel.
R
Data from track 2 excluding start sentinel and end sentinel.
R
Data from track 3 excluding start sentinel and end sentinel.
R
Message authentication codes returned by device after PIN is
collected (DUKPT mode only). (IntelliPIN)
Encode Coercivity Mode (MT-95). Specifies the energy level used
to encode the magnetic stripe:
= automatic selection
0
= LoCo only mode
1
= HiCo only mode
2
indicates the card can be removed between a read and write
0
operation. Set this to
95).
Transaction type –
Description
(IBM 3624)
ibm
pin_blk_fmt
representing enabled tracks, e.g.,
1
to turn on secure online encode mode (MT-
1
= debit,
= credit (IntelliPIN).
d
c
is
(IntelliPIN)
ibm
to disable. (IntelliPIN)
0
representing
0
enables
110
Advertisement
Chapters
Table of Contents
