Elo TouchSystems Entuitive ET1725L Series User Manual page 170

Configuration Examples for Windows NT/2000/XP
These examples are for illustration only. Most of the command line entries will have to be
modified to accommodate the actual installation.
Device or driver
Generic RS-232
Generic KB
IntelliPIN RS-232
IntelliPIN RS-232
IntelliPIN KB
Mag-Wedge
MICR+
Mini MICR RS-232
Mini MICR KB
MiniWedge
MT-85
MT-95
Port Powered Insert
Reader
Port Powered Swipe
Reader
Command Line
MTCFG COM5 "Generic Serial (RS-
232)" FriendlyName=MT-80
UsePort=COM1 baud=4800 parity=0
datasize=7
MTCFG COM6 "Generic Wedge
(Keyboard)"
FriendlyName=MagReader
MTCFG COM7 "IntelliPIN MICR
Aux" FriendlyName=IntelliPIN
"UsePort=AUX port on MICR+"
MTCFG COM8 "IntelliPIN RS-232"
FriendlyName=PINPad
UsePort=COM2
MTCFG COM9 "IntelliPIN Wedge"
"FriendlyName=IntelliPIN KB"
MTCFG COM10 "Mag-Wedge"
"FriendlyName=Wedge Reader"
MTCFG COM11 "MICR+"
FriendlyName=MICR+ UsePort=COM1
MTCFG COM12 "Mini MICR RS-232"
FriendlyName=MICRS UsePort=COM1
MTCFG COM13 "Mini MICR Wedge"
FriendlyName=MICRW
MTCFG COM14 "MiniWedge"
FriendlyName=MSR
MTCFG COM15 "MT-85"
"FriendlyName=MSR Encoder"
UsePort=COM2
MTCFG COM16 "MT-95"
FriendlyName=MT-95 UsePort=COM1
baud=9600 parity=-1 datasize=8
MTCFG COM17 "Port-powered
insert reader"
FriendlyName=PPInsert
UsePort=COM1
MTCFG COM18 "Port-powered swipe
reader" FriendlyName=PPSwipe
UsePort=COM2
Appendix A. Installation and Setup
Comment
Be sure to specify the proper
communication parameters for
the selected device.
"UsePort" is not required for
keyboard devices.
The MICR+ driver must be
installed before this driver.
Communication parameters
may be required.
Quotes are used for Friendly
Name to allow the space.
Communication parameters
may be required.
Communication parameters
may be required.
Communication parameters
may be required.
Communication parameters
may not be required.
No communication parameters
are required.
No communication parameters
are required.
71