Elo TouchSystems Entuitive ET1725L Series User Manual page 76

Figure 2-2. Mounting Hole Dimensions For Surface
2. Ensure the Reader is positioned on a flat, accessible surface with at least 4 inches
clearance on either end for room to swipe a card. Orient the Reader so the side with the
LED is facing the direction of intended use.
If fastening tape is to be used, clean the area that the Reader will be mounted on with
isopropyl alcohol. Remove the adhesive protective cover on the fastening tape, and
position the Reader and push down firmly.
3. Mount the Reader.
Section 2. Installation
7