Table of Contents
Advertisement
Step 2-Connecting the Video Cables
•
Tilt the screen up and back to access the connection ports.
•
Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D
cable, the RCA or the S-Video cable to the video port on your PC.
•
Connect the other end of the video cable to the video connector on your
touchmonitor by routing the cable through the hole in the stand.
•
Secure the cable to your touchmonitor and PC by turning the screws on
the connector clockwise.
•
Place the cable in the cable management clip.
Elo Entuitive Touchmonitor User Guide
15
Advertisement
Table of Contents
