Elo TouchSystems Entuitive ET1725L Series User Manual page 124

Read Description
Argument
pin Collect PIN from cardholder and read PIN data from the device.
The following properties may be set before issuing this command:
•
•
•
•
The response will be:
Upon successful read, the following properties will be set:
•
•
– cardholder account number, including check digit,
account_no
if required
– transaction amount in cents, without punctuation, if
amount
required
– (MSK mode only) encryption key to use: M for master,
enc_key
S for session, 0-3 for lower working keys, A-J for upper working keys.
– (DUKPT mode only) transaction type: D for debit, C for
xact_type
credit
/read P000
SS is a two-digit status code:
00 – successful read
45 – enc_key is not defined
83 – aborted, etc.
pin_block is the encrypted PIN block as returned by the device.
Visa_mac1, visa_mac2, visa_mac3
codes (DUKPT mode only)
– serial number of encryption key (DUKPT mode only)
enc_key_sn
Section 3. Commands
SS pin_block
– message authentication
25