Elo TouchSystems Entuitive ET1725L Series User Manual page 102

usually remain unchanged, even though the new device may be very different from the
old one.
The features of a driver that implement a device control language completely shield an
application developer from the complexities of device-specific functionality.
LANGUAGE OVERVIEW
The device control language is text based and designed to utilize the read and write file I/O
facilities of the underlying operating system. All commands, their responses and properties
consist of text strings that are written to or read from the driver using basic file I/O. The control
language is based on a property/command model that is similar to the notions of properties and
methods as accepted in environments such as Visual Basic or Delphi.
Properties
All properties are accessed in a uniform way: by using a
command. Properties are either read/write or read only. A
property will fail. All properties are identified by a string name and use strings for their
arguments. Properties defined by the control language fall into the following three groups:
•
Capability properties – These properties contain information about the capabilities of a
particular device and are generally read only. They allow an application to query a
device's capabilities to determine if the device is suitable for a particular task. Included
in this category are
).
c_check
•
Configuration properties – These properties configure a device for different modes of
operation or may alter the way some commands behave. Because of this, they are usually
readable and writable. They give an application the ability to set up a device for a particular
task that requires a specific, non-default mode of operation. Included in this category are
,
capitalize
•
Device-specific properties −These properties cover configuration requirements that are
not common among MagTek devices, even if the devices belong to the same class. An
application can determine if a particular set of device-specific properties is available by
first querying the device's capabilities or version. Refer to Appendix D, Device Driver
Summaries, for a particular driver to see how these properties are affected with an
individual device.
Properties can be "action" properties. That is, the driver may execute an action on the device
when a property is set. For example, an application can enable or disable magnetic stripe tracks
by setting the
trk_enable
the device to enable or disable the desired tracks.
,
c_cardwpin c_check
, and
dev_version port_name
property. The driver responds by sending one or more commands to
get (/get prop)
command with a read only
set
, , and
c_pin c_magnetic (e
(e.g.,
/set capitalize 1
Section 1. Overview
or
set(/set prop)
. g.,
/get
).
3