IntelliTouch Touchmonitor Specifications
Mechanical
Positional Accuracy
Touchpoint Density
Touch Activation Force
Surface Durability
Expected Life Performance
Sealing
Optical
Light Transmission (per ASTM
D1003)
Visual Resolution
Gloss (per ASTM D2457 using a
60-degree gloss meter)
Environmental
Chemical Resistance
Electrostatic Protection
(per EN 61 000-4-2, 1995)
Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to
less than ±1%.
More than 100,000 touchpoints/in
Typically less than 3 ounces (85 grams).
Surface durability is that of glass, Mohs' hardness rating of 7.
No known wear-out mechanism, as there are no layers, coatings, or
moving parts. IntelliTouch technology has been operationally tested to
more than 50 million touches in one location without failure, using a
stylus similar to a finger.
Unit is sealed to protect against splashed liquids, dirt, and dust.
90%
All measurements made using USAF 1951 Resolution Chart, under 30X
magnification, with test unit located approximately 1.5 in (38 mm) from
surface of resolution chart.
Clear surface: Excellent, with no noticeable degradation.
Antiglare surface: 6:1 minimum.
Antiglare surface: Curved: 60 ± 20 gloss units or 75 ± 15 gloss units.
The active area of the touchscreen is resistant to all chemicals that do
not affect glass, such as:
Acetone
Toluene
Methyl ethyl ketone
Isopropyl alcohol
Methyl alcohol
Ethyl acetate
Ammonia-based glass cleaners
Gasoline
Kerosene
Vinegar
Meets Level 4 (15 kV air/8 kV contact discharges).
2
2
(15,500 touchpoints/cm
).
C-31