Software_Id Property - Elo TouchSystems Entuitive ET1725L Series User Manual

USB Swipe Reader
Property ID is a one byte field that contains a value that identifies the property. The following
table lists all the current property ID values:
Value
0
1
2
The Property Value is a multiple byte field that contains the value of the property. The number
of bytes in this field depends on the type of property and the length of the property. The
following table lists all of the property types and describes them.
Property Type
Byte
String

SOFTWARE_ID PROPERTY

Property ID:
Property Type:
Length:
Get Property:
Set Property:
Description:
number and version for the device. The first 8 bytes represent the part number and the last 3
bytes represent the version. For example this string might be "21042804A02". Examples
follow:
Example Get SOFTWARE_ID property Request (Hex):
Example Get SOFTWARE_ID property Response (Hex):
Result Code
00
18
Property ID
SOFTWARE_ID
SERIAL_NUM
POLLING_INTERVAL
Description
This is a one byte value. The valid values depend on the property.
This is a multiple byte ASCII string. Its length can be zero to a
maximum length that depends on the property. The value and
length of the string does not include a terminating NUL character.
0
String
Fixed at 11 bytes
Yes
No
This is an 11 byte read only property that identifies the software part
Cmd Num
00
Data Len
01
Description
The device's software identifier
The device's serial number
The interrupt pipe's polling interval
Data Len Prp ID
01 00
Prp Value
32 31 30 34 32 38 30 34 41 30 32