Elo TouchSystems Entuitive ET1725L Series User Manual page 167

17" lcd desktop touchmonitor with magnetic swipe reader
Table of Contents

Advertisement

MagTek Device Drivers for Windows
and MTD device will appear as COM7. The MICR+ device appears to the system as COM12
and has a friendly name : MICR+.) Two examples are shown:
mtcfg COM7 "IntelliPIN MICR Aux" "UsePort=AUX port on MICR+"
mtcfg COM7 "IntelliPIN MICR Aux" "UsePort=AUX port on COM12"
Viewing the List of Configured Devices (WNT/2000/XP)
Execute MTCFG with no command line arguments. If the above examples have been used, the
displayed result will be:
port Conn. to
COM5
COM6 COM1
COM7 AUX port on MICR+
Using the MTCFG Utility (WNT/2000/XP)
MTCFG.EXE is a command-line utility installed with the MTD drivers. It requires that the driver
binaries be correctly installed, as described in the previous sections. MTCFG cannot be used to
install the driver binaries; running it from the installation media before the driver has been
installed will result in the following error message:
Mag-Tek driver is not correctly installed. Please install the driver
before using this program.
The same message will be displayed if the installation has been modified manually, e.g., the
installation script has been renamed or removed or the driver's Registry data has been removed.
It is recommended that all applications that may have opened a MagTek device be terminated
before using MTCFG to change a device's configuration, or to add or remove a device.
68
"FriendlyName=IntelliPIN AUX"
or
"FriendlyName=IntelliPIN AUX"
model
MiniWedge
Mini MICR RS-232
IntelliPIN MICR Aux
friendly name
MiniWedge
Mini MICR RS-232
IntelliPIN AUX

Advertisement

Table of Contents
loading

Table of Contents