Optimizing The Lcd Display; Vesa Mount On Your Touchmonitor - Elo TouchSystems Entuitive ET1725L Series User Manual

Optimizing the LCD Display

To ensure the LCD display works well with your computer, configure the
display mode of your graphic card to make it less than or equal to 1024 x 768
resolution, and make sure the timing of the display mode is compatible with the
LCD display. Refer to Appendix A for more information about resolution.
Compatible video modes for your touchmonitor are listed in Appendix C.

VESA Mount on Your Touchmonitor

Your touchmonitor conforms to the VESA Flat Panel Monitor Physical
Mounting Interface (FPMPMI™) Standard which defines a physical mounting
interface for flat panel monitors, and corresponding standards for flat panel
monitor mounting devices, such as wall and table arms. The VESA mounting
interface is located on the back of your touchmonitor and is shipped
pre-connected to the base.
N : The above drawing displays the VESA mounting interface after the removal of the
OTE
mounting cover and base.
Remove these four screws
(retain for reassembly)
115
115
Wall mount/Surface mount template
100
100
VESA mounting
interface
VESA mounting surface is located
12mm below the surface of the
plastic.
Customer wall
(4X) M5
clearance hole
65
70 X 30 cable access hole
2-13