Touch Interface Connection; Step 1 Connecting The Video Cable - Elo TouchSystems 1928L User Manual

Touch Interface Connection

Note:
Before connecting the cables to your touchmonitor and PC, be sure that the computer
and touchmonitor are turned off.
STEP 1-Connecting the Video Cable
2-6 Elo Touchmonitor User Guide
CONNECTIONS ON UNDERSIDE
• Tilt the screen up and back to access the connection ports.
• Connect the 15-pin video cable (the ferrite bead end) or 24-pin DVI-D cable to the video
port on your PC.
• Connect the other end of the video cable to the video connector on your touchmonitor.
• Secure the cable to your touchmonitor and PC by turning the screws on the connector
clockwise.
FEMALE 15-PIN
VIDEO CONNECTOR
VIDEO PORT
VIDEO CABLE