Music On Hold; Ftp/Https Access Data - Siemens OpenStage 40 Administration Manual

administration.fm
Administration
Transferring Phone Software, Application and Media Files
3.14.4

Music on Hold

If enabled by the user, the Music on Hold (MoH) sound file is played when a call is put on hold.
The file size for a Music on Hold file is limited to 1MB. If the file is too large or the
>
contents of the file are not valid, the file will not be stored in the phone.
The following formats for Music on Hold are supported:
• Proprietary Music on Hold format for optiPoint 410/420 phones
• WAV format. The recommended specifications are:
• Audio format: PCM
• Bitrate: 16 kB/sec
• Sampling rate: 8 kHz
• Quantization level: 16 bit
• MIDI format
• MP3 format (OpenStage 60/80 only). A bitrate of 48 kB/sec is recommended.
3.14.4.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see Section 3.14.2, "Common FTP/HTTPS Set-
tings") are to be used, Use Default must be set to "Yes", and only the Filename must be spec-
ified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: "Yes", "No"
Default: "No"
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS"
Default: "FTP"
• FTP Server address: IP address or hostname of the FTP/HTTPS server in use.
• FTP Server port: Port number of the FTP/HTTPS server in use.
Default: 21
• FTP account: Account at the server (if applicable).
• FTP username: User name for accessing the server.
• FTP password: Password corresponding to the user name.
3-136
A31003-O1010-M100-17-76A9, 09/09/2010
OpenScape Voice - OpenStage Family, Administration Manual