Siemens OpenStage 40 Administration Manual page 365

10. Enter the following data:
Parameter
Digit string
Action
Minimum length
Maximum length 13
Timer
Terminating
Character
Summary: Any numbers that start with 011 and have a length of 13 digits are sent to the
server immediately. Shorter numbers with a length from 4 digits onwards are sent after a
3 seconds delay.
11. The example dial plan is completed; it should look like this:
12. You can check the dial plan using the phone's web interface; navigate to Diagnostics >
Fault trace configuration > Download dial plan file.
A31003-O1010-M100-17-76A9, 09/09/2010
OpenScape Voice - OpenStage Family, Administration Manual
Value Description/Remarks
This rule matches numbers beginning with 011. In the
011
USA, this digit string is the prefix international calls.
When the entered digit string reaches the Minimum
S
length, the Timer is started. On expiry, the digit string
is sent.
When the length of the digit sequence entered by the
4
user reaches this value, the Timer is started.
When the length of the digit sequence entered by the
user reaches this value, the digits are sent to the server
immediately. The Timer is overridden.
When the length of the digit sequence entered by the
3
user reaches the Minimum length, the phone waits 3
seconds for further digits. If the user does not enter any
further digits, the Action is triggered.
When this character is entered, the digits are sent to
#
the server immediately, regardless of the criteria con-
tained in this rule.
beispiele.fm
Examples and HowTos
Dial Plan (V2)
5-23