Siemens OpenStage 40 Administration Manual page 364

beispiele.fm
Examples and HowTos
Dial Plan (V2)
7. Click on to create the second dial plan rule.
8. Enter the following data:
Parameter
Digit string
Action
Minimum length
Maximum length 1
Timer
Summary: When 0 is entered as first digit, the phone will wait 1 second. After this, 0 will be
sent to the server, which might result in a call to an operator, for instance. When further
digits are entered during the 1 second timespan, the next dial plan rule will take control.
9. Click on to create the third dial plan rule.
5-22
Value Description/Remarks
This rule matches numbers beginning with 0. In the
0
USA, this number calls the operator.
When Minimum length, Maximum length, and the
C
length of the digit string entered by the user match, the
Timer is started. When it expires, the digits are sent to
the server. When another digit is entered before expiry,
the next dial plan entry will come into operation.
This rule matches numbers with a length of 1 digits.
1
The phone waits 1 second for further digits. If the user
1
does not enter any further digits, the action specified in
Action is initiated.
OpenScape Voice - OpenStage Family, Administration Manual
A31003-O1010-M100-17-76A9, 09/09/2010