Default Port List - Siemens OpenStage 40 Administration Manual

4.2

Default Port List

The following table contains all default ports, resp. port ranges, and protocols used by the ser-
vices running on OpenStage SIP phones.
Service
Payload transport (for 30 lines)
SIP subscriber; TCP is used
SIP subscriber; TLS is used
SIP subscriber; UDP is used
XML applications in phone, connec-
ting to an application server
Directory access via LDAP
(Only relevant for OpenStage 60/80)
DHCP Client
DNS Client
DLS contact me service - workpoint
side
Communication with the DLS work-
point interface, default mode
Communication with the DLS work-
point interface, secure mode
Connection to the control port of FTP
server
FTP client; uses the FTP server in
active mode
HTTPS file download server
Client application which sends QDC
data to the QCU
Sender part of SNMP agent
Receiver part of SNMP agent;
receives Set/Get commands
SNTP client; queries time informati-
on in unicast operation
A31003-O1010-M100-17-76A9, 09/09/2010
OpenScape Voice - OpenStage Family, Administration Manual
Server De- Client Default
fault Port Port
5004 - 5065 5004 - 5065
5060 1024 - 65535
5061 1024 - 65535
5060 5060
--- 1024 - 65535
--- 1024 - 65535
--- 68
--- 1024 - 65535
8085 ---
--- 18443
--- 18444
21 1024 - 65535
1024 - 65535 20
--- 443
--- 1024 - 65535
--- 1024 - 65535
161 ---
--- 123
referenz.fm
Technical Reference
Default Port List
Protocol Stack
RTP - RTCP / UDP
SIP / TCP
SIP / TLS
SIP / UDP
HTTP / TCP
LDAP / TCP
DHCP / UDP
DNS / TCP_UDP
HTTP / TCP
HTTPS / TCP -
SSL / TLS
HTTPS / TCP -
SSL / TLS
FTP / TCP
FTP / TCP
HTTPS / TCP -
SSL/TLS
SNMP / UDP
SNMP / UDP
SNMP / UDP
SNTP / UDP
4-67