Initial Digit Timer - Siemens OpenStage 40 Administration Manual

3.6.3

Initial Digit Timer

This timer is started when the user goes off-hook, and the dial tone sounds. When the user has
not entered a digit until timer expiry, the dial tone is turned off, and the phone changes to idle
mode. The Initial digit timer (seconds) parameter defines the duration of this timespan.
Administration via WBM
System > Features > Configuration
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
|
--- General
A31003-O1010-M100-17-76A9, 09/09/2010
OpenScape Voice - OpenStage Family, Administration Manual
|
--- Initial digit timer
administration.fm
Administration
Feature Configuration
3-61