Setting the base station via the handset
Activating/deactivating music on hold
¢
§Menu§
Music on hold
Activating/deactivating repeater mode
With a repeater you can increase the range and signal strength of your base sta-
tion. You will need to activate repeater mode. This will terminate any calls
being made via the base station at that time.
Preconditions:
u
A repeater is registered with the base station.
u
Eco mode
¢
§Menu§
Repeater Mode
§OK§
Please note
Repeater support and
i.e. both functions cannot be used at the same time.
Setting default line
You can set whether you want to make calls via VoIP or the fixed line network
as standard.
Please note
The default line is only relevant when dialling numbers that are not subject to
dialling plans (
£
(
Page
¢
§Menu§
IP / Fixed Line
When making calls:
¤
Briefly press the talk key c if you want to make a call via this default line.
¤
Press and hold the talk key c if you want to make the call via the other
connection type.
ú For how to adjust the setting on the Web configurator,
94
¢
Settings
Base
Select and press
§OK§
(‰ = on).
Eco Mode+
is deactivated (
/
¢
¢
Settings
Base
Select and press
§OK§
Press the display key to confirm the security prompt.
Eco mode
£
Page
133) and are entered without a line suffix
38).
¢
¢
Settings
Base
Select and press
§OK§
to activate or deactivate the hold music
£
Page
75).
Additional Features
(‰ = on).
£
(
Page
Eco Mode+
/
¢
Telephony
Default Line Type
(‰ = on).
75) cancel each other out,
£
Page
129.