Terminal Hostname (V2) - Siemens OpenStage 40 Administration Manual

3.3.6.3

Terminal Hostname (V2)

With OpenStage firmware V2, the phone's hostname for registration with the DNS server can
be customised. The phone will send the specified hostname to the DNS server using DDNS.
Therefore, the DNS server must support DDNS.
The corresponding DNS domain is configured in Network > IP configuration > DNS domain
(see Section 3.3.6.1, "DNS Domain Name").
The current DNS name of the phone is displayed at the right-hand side of the banner of the
admin and user web pages, under DNS name. To see configuration changes, the web page
must be reloaded.
It is recommended to inform the user about the DNS name of his/her phone. The
>
complete WBM address can be found under User menu > Network information >
Web address.
The DNS name can be constructed from pre-defined parameters and free text. Its composition
is defined by the DNS name construction parameter. The following options are available:
• "None": The phone does not attempt to change its DNS name via DDNS.
• "MAC based": The DNS name is built from the prefix "OIP" followed by the phone's MAC
address.
• "Web name": The DNS name is set to the the string entered in Web name.
• "Only number": The DNS name is set to the Terminal number, that is, the phone's call
number (see Section 3.5.1, "Terminal and User Identity").
• "Prefix number": The DNS name is constructed from the the string entered in Web name,
followed by the Terminal number.
Administration via WBM
System > System Identity
Administration via Local Phone
|
--- Administration
|
--- Identity
|--- Web name
|
--- DDNS hostname
A31003-O1010-M100-17-76A9, 09/09/2010
OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Administration
IP Network Parameters
3-25