Quick Start; Access The Web Interface (Wbm) - Siemens OpenStage 40 Administration Manual

2.3

Quick Start

This section describes a typical case: the setup of an OpenStage endpoint in an environment
using a DHCP server and the web interface. For different scenarios, cross-references to the
corresponding section of the administration chapter are given.
Alternatively, the DLS (Deployment Service) administration tool can be used. Its
>
Plug & Play functionality allows to provide the phone with configuration data by as-
signing an existing data profile to the phone's MAC address or E.164 number. For
further information, see the Deployment Service Administration Manual.
Any settings made by a DHCP server are not configurable by other configuration
>
tools.
2.3.1

Access the Web Interface (WBM)

1. Open your web browser (MS Internet Explorer or Firefox) and enter the appropriate URL.
Example: https://192.168.1.15 or https://myphone.phones (firmware V2)
For configuring the phone's DNS name, which is possible which firmware V2, please refer
to Section 3.3.6.3, "Terminal Hostname (V2)".
A31003-O1010-M100-17-76A9, 09/09/2010
OpenScape Voice - OpenStage Family, Administration Manual
inbetriebnahme.fm
Startup
Quick Start
2-7