Activating/Deactivating; Music On Hold; Activating/Deactivating Repeater Mode; Set Default Connection - Siemens Gigaset S675IP User Manual

Please note:
For how to re-register the handsets after reset-
ting, if necessary, see page 71.
¤
Remove the cable connections from
the base station to the router (page 14)
and fixed line network (page 13).
¤
Remove the base station mains adapter
from the socket (page 13).
¤
Press and hold the registration/paging
key (page 2).
¤
Plug the mains adapter back into the
power socket.
¤
Continue to press and hold the registra-
tion/paging key (at least 2 sec.).
¤
Release the registration/paging key.
The base station has now been reset.

Activating/deactivating

music on hold

¢ ¢
v Ð
Base
Music on hold
Select and press
or deactivate music on hold
‰
( = on).
Activating/deactivating

repeater mode

With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls being
made via the base station at that time.
Precondition: A repeater is registered
with the base station.
¢ ¢ ¢
v Ð
Base
Repeater Mode
Select and press
Press the display key to con-
§Yes§
firm the security prompt.
to activate
§OK§

Add. Features

‰
( = on).
§OK§

Set default connection

You can make settings according to
whether you want to make calls via VoIP or
the fixed line network by default.
Please note:
The standard connection is only relevant when
dialling numbers that are not subject to dial-
ling plans (page 109) and are entered without
a line suffix (page 25).
¢ ¢
v Ð
Telephony
/
VoIP Fixed Line
Select and press
When making calls:
¤
Press the talk key c briefly if you
want to make the call via the default
connection.
¤
Press and hold the talk key c if you
want to make the call via the other con-
nection type.
Updating the base station
firmware
If necessary, you can update your base sta-
tion firmware.
The firmware update is downloaded
directly from the Internet by default. The
relevant Web page is preconfigured in
your phone.
As an alternative to uploading the
firmware via the Internet, it can also be
loaded from a local PC. You can specify the
PC via the Web configurator (page 114).
This setting applies only to the following
firmware update.
Precondition:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed
line network or VoIP.
u
There is no internal connection
between the registered handsets.
u
No other handset has opened the base
station menu.
Base station settings
¢
Default Line
‰
( = on).
§OK§
85