Removing The Front Bezel - HP Compaq MultiSeat ms6005 Hardware Reference Manual

Removing the Front Bezel

1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
5.
If the computer is on a stand, remove the computer from the stand and lay the computer down.
6.
Remove the computer access panel.
7. Lift up the three tabs on the side of the bezel (1), then rotate the bezel off the chassis (2).
Figure 3-3
54 Chapter 3 MultiSeat ms6200 Desktop Hardware Upgrades
Regardless of the power-on state, voltage is always present on the system board as
Removing the Front Bezel