HP Compaq MultiSeat ms6005 Hardware Reference Manual page 70

9.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
10.
Repeat steps 8 and 9 to install any additional modules.
11.
Replace the access panel.
12.
If the computer was on a stand, replace the stand.
13.
Reconnect the power cord and turn on the computer.
14.
Lock any security devices that were disengaged when the access panel was removed.
The computer should automatically recognize the additional memory the next time you turn on the
computer.
62 Chapter 3 MultiSeat ms6200 Desktop Hardware Upgrades