Changing From Desktop To Tower Configuration - HP Compaq MultiSeat ms6005 Hardware Reference Manual

Changing from Desktop to Tower Configuration

The computer can be used in a tower orientation with an optional tower stand that can be purchased
from HP.
1. Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
5.
Orient the computer so that its right side is facing down and place the computer in the optional
stand.
Figure 2-6
NOTE:
tower stand.
6.
Reconnect the power cord and any external devices, then turn on the computer.
NOTE: Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains clear
and free of obstructions.
Regardless of the power-on state, voltage is always present on the system board as
Changing from Desktop to Tower Orientation
To stabilize the computer in a tower orientation, HP recommends the use of the optional
Changing from Desktop to Tower Configuration
15