Removing The Front Bezel - HP x4000 Technical Reference Manual

Installing or Replacing Parts and Accessories
Cover and Front Bezel

Removing the Front Bezel

You only need to remove the front bezel when you are adding or removing
devices in the 5.25-inch or 3.5-inch front drive bays.
To remove the bezel:
1. Gently lift the four plastic tabs starting with the bottom tab and
working your way to the top.
2. Rotate the bezel off the Workstation chassis.
Figure 10-2 Removing the bezel
Plastic Tabs
Chapter 10 147
This manual downloaded from http://www.manualowl.com