Changing From Desktop To Tower Configuration; Power Supply, External - HP Compaq 6005 Pro Maintenance And Service Manual
Business pc ultra-slim desktop
Hide thumbs
Also See for Compaq 6005 Pro:
- Maintenance & service manual (259 pages) ,
- Hardware reference manual (62 pages) ,
- Specification (57 pages)
Table of Contents
Advertisement
Changing from Desktop to Tower Configuration
1.
Prepare the computer for disassembly
2.
Place the computer firmly down into the stand.
Figure 6-41
3.
Reconnect the external equipment, plug the power cord into a power outlet, and turn the
computer on.
4.
Lock any security devices that were disengaged when the computer cover or access panel was
removed.
To change from the tower configuration to the desktop configuration, reverse the previous steps.
NOTE:
An optional Quick Release mounting bracket is available from HP for mounting the computer
to a wall, desk, or swing arm.
Power Supply, External
The USDT chassis uses an external power supply.
WARNING!
replacement power supply provided by HP, or a power supply purchased as an accessory from HP
should be used with the computer.
70
Chapter 6 Removal and Replacement Procedures
Placing the Computer on the Stand
To reduce potential safety issues, only the power supply provided with the computer, a
(Preparation for Disassembly on page
31).
Advertisement
Table of Contents
