Installing The Board In A Standard Slot (Slots 1, 2, 3 Or 4) - HP Vectra VL series 8 Maintenance Manual

Installing the Board in a Standard Slot (Slots 1, 2, 3 or 4)

1 Disconnect the computer's power supply cord and any connection to
a telecommunication network.
2 Remove the computer's cover.
3 At the rear of the PC, unscrew the retaining bracket (you can use a
coin to do this) and remove it.
4 Find a free slot. Some boards may have preferred locations and
special installation instructions detailed in their manuals.
5 Remove the slot cover. Store it in a safe place.
1 How to Install Accessories In Your PC
Installing Accessory Boards
English 25