CAUTION:
Administrator cannot gracefully shutdown a blade PC. This condition may result in the permanent loss
of critical data.
Disabling Network Protocols
To modify the supported communications protocols of the enclosure using the Web-based user
interface:
1.
Click the Enclosure tab.
2.
Click Network Configuration in the left panel.
3.
Select the appropriate radio buttons in the Protocols area.
4.
Click Apply.
To modify the supported communications protocols of the enclosure using the CLI, choose from among
the following commands:
●
To disable http/https communication, type: DISABLE WEB
Disabling http/https causes the users to lose access to the Web-based user interface.
●
To disable automatic time updates, type: DISABLE NTP
●
To disable SNMP communication, type: DISABLE SNMP
●
To disable Secure Shell communication, type: DISABLE SECURESH
ENWW
Without the blade PC health driver or an ACPI-compliant operating system, the Integrated
Disabling Network Protocols 113