Table of Contents
Advertisement
Navigation mode
Note:
On routes with variable speed limits
(dependent on weather conditions, time
of day etc.) a symbol with the text
or a speed with an underscore (e.g.:
"80") draws the driver's attention to the
fact that the speed limit is variable.
As temporary speed limits (e.g. due to road
works) are usually short-lived, these have
not been stored in the navigation data.
Example of a speed limit:
2110
Example of a dynamic speed limit:
2111
60
ETA setting
You can configure the calculation of the
ETA. ETA stands for Estimated Time
of Arrival.
Dyn.
!
In the Settings menu, select the
setting
entry.
2091
!
Confirm your selection by pressing
the rotary control/push button
2092
You may now select
!
Van
or
Set freečy
.
Sports car
•
This setting indicates to the Cascade
that you tend to drive rather quickly.
An earlier ETA is calculated.
•
Car
This is the default setting. It offers
sufficiently accurate calculation of the
ETA for most drivers.
ETA
Van
•
This setting indicates to the Cascade
that you will need a little longer for the
planned route. This setting could be
selected, for example, for a slower
vehicle or in dense traffic areas.
Set freečy
•
.
Select this option to modify the calcu-
lation of the ETA to suit your require-
ments.
Note:
Only one of the two settings may be
Sports car
,
Car
,
active ( ) at the same time.
!
Turn the rotary control/push button
to activate the required setting ( ).
Advertisement
Table of Contents
