Station Already In Memory; Moving Stations - Becker Cascade Operation Manual

Radio mode
! Turn the rotary control/push button
to select the required memory position.
Confirm the memory position by press-
!
ing the rotary control/push button
Depending on the setting in "Voice
entries" on page 70, the procedure for
saving a voice entry for the station
stored will now start.
The station is now stored in the station
memory.
76

Station already in memory

The station to be stored is already set and
you are in station memory fast access
. mode.
! Turn the rotary control/push button
to select the position in the memory list
in which the station to be stored is to be
stored.
! Press the rotary control/push button
until a menu appears.
3019
Select the Save current
!
entry.
The station is now stored in the station
memory.
Depending on the setting in "Voice
entries" on page 70, the procedure for
saving a voice entry for the station
stored will now start.

Moving stations

You can move the position of a station
stored in the station memory.
! Turn the rotary control/push button
to select the memory to be moved.
Press the rotary control/push button
!
until a menu appears.
3020
Select the Move station
!
The station to be moved is marked with
an arrow.
station here
! Turn the rotary control/push button
to select the required memory position.
! Confirm the memory position by press-
ing the rotary control/push button
entry.
.