Automatic Dialogue; Voice Entries - Becker Cascade Operation Manual

! For the Rečative to audio setting, select
Vočume .
7008
! Turn the rotary control/push button
to select the required volume.
Note:
If you have previously selected
to audio , you can set the volume in the
range between -10 and +10. In this case,
a negative value means that announce-
ments will be made more quietly than
the selected volume for the audio
source.

Automatic dialogue

You can specify which events should
trigger automatic voice dialogue. Auto-
matic dialogues are automatic queries
from the Cascade after particular events,
for example whether a voice entry is to
be created after a radio station has been
stored.
! Select Automatic diačogues
Rečative
mode settings.
7009
Next, select the required event.
!
Turn the rotary control/push button
!
to switch the required function on ( )
or off ( ).

Voice entries

You can use this function to read out and
delete all voice entries already stored for
the radio and address book functions.
Voice entries
! Select
settings.
in the voice
7010
Note:
The number of voice entries already
assigned appears on the right-hand side
of the display.
Reading out:
Select Read out radio
!
book
.
The selected voice entries are read out.
Settings
in the voice mode
or Read out add.
131