Local - Becker Cascade Operation Manual

Hide thumbs Also See for Cascade:
Table of Contents

Advertisement

Navigation mode
In vicinity of čocation
You can select a POI in the vicinity of
the vehicle. When you make your
selection, the unit will tell you in
which direction the POI is located and
how far away it is.
In country
You can select a POI for the selected
country from a range of national POI
categories.
In vicinity of destination
You can select a POI in the vicinity of
the destination.
Note:
The
In vicinity of destination
entry can only
be selected if route guidance is active.
In pčace
You can select a POI in a specific
town.
40

Local

!
In the POI menu, select the
čocation
entry.
Old
version
!
Confirm your selection by pressing
the rotary control/push button
2042
!
Turn the rotary control/push button
and then press the rotary control/push
button to select the required POI cate-
gory.
2043
The data entry menu for POIs appears
or, if fewer than 10 POIs are available in
the selected category, the unit switches
directly to the POI list.
!
Turn the rotary control/push button
and then press the rotary control/push
In vicinity of
button to select each letter one after the
other.
Accept entry:
!
In the data entry menu, select the
symbol.
or
.
!
Press the rotary control/push button
and hold it down for at least 2 seconds.
2044
Turn the rotary control/push button
!
and then press the rotary control/push
button to select the required POI.
Route guidance to the selected point of
interest is initiated.

Advertisement

Table of Contents
loading

Table of Contents